News
Ningbo Hicon Industry Co.,Ltd.
Contact Us
Ningbo Hicon Industry Co.,Ltd.
ADD:Room 1308, Tower B, Wufu Tianxinglong Mansion, No. 358 East Fengqi Road, Shangcheng District, Hangzhou, Zhejiang, China
Fax:0086-0571-86792919
WhatsApp/Wechat:0086-137-58228639
E-mail:stella@hisurp.com
One: What is a freezer? A refrigerator is a mechanical device that uses a compressor to change the pressure change of the refrigerant gas to achieve low temperature refrigeration. The compressor used is different from the general air compressor due to its different use conditions and compression wor... read more
The working principle of vacuum coating is that the film evaporates and crystallizes on the surface of the workpiece at high temperature. Because the air will cause resistance to the evaporated film molecules and cause collisions to make the crystals rough and dull, it must be under high vacuum to m... read more
Refrigerant circulation system: The liquid refrigerant in the evaporator absorbs the heat in the water and starts to evaporate. A certain temperature difference is formed between the final refrigerant and the water, and the liquid refrigerant is also completely evaporated into a gaseous state, which... read more
1. Simple structure, less moving parts, less wearing parts, only 1/10 of the piston type, low failure rate and long life. 2. The circular motion is smooth, there is no "surge" phenomenon during low-load operation, the noise is low, and the vibration is small. 3. The compression ratio can be as high ... read more
The water-cooled chiller needs to be cleaned regularly. If it is not cleaned on time, there will be a blockage of the machine, which will reduce the efficiency of the chiller. Of course, it is not ruled out that some equipment parts are not good, in humid or acid or alkaline environments. Rusting ca... read more
In the process of long-term operation of industrial chillers, if the enterprise does not have any safety awareness, then the enterprise will have various inexplicable failures in the process of operating the equipment. If there are various common faults in the equipment, it will not only affect the ... read more